Shock doctor gel max? (2023)

Do you boil Shock Doctor Gel Max?

Bring water to a boil. Remove water from heat source. Let water stand for 30 seconds, then place mouthguard in water for 75 seconds. Do not exceed 90 seconds.

Bite down hard on mouthguard, suck in strongly, and use fingers to press edges of mouthguard into teeth and gum line through lips and cheeks for 20 seconds. Remove mouthguard and cool in cold water for 30 seconds. Replace into mouth and test for a good, firm fit.

Product Information. The Shock Doctor™ Youth Gel Max strapless mouthguard is the first mouthguard designed specifically for use with braces.

Many Shock Doctor® mouthguards are designed for boil and bite customization. This means that you can customize the fit of your mouthguard. To soften the gel, place the mouthguard in boiling water for 30 to 90 seconds. Remove the mouthguard, let it cool and place in your mouth.

Your SISU Mouthguard is remoldable up to 20 times without losing its protective properties. Just put your guard in hot water (170℉) and watch it return to its original shape.

Boil enough boiling water to submerge the mouthguard. Start a small pot of boiling water on the stove. You can alternatively boil some water in the hot water jug or use a microwave. Place the mouthguard carefully and submerge it in the hot water and let it soften for 20 seconds.

Ideally, your mouthguard should fit snug against your upper teeth without shifting and without the need to adjust or clench your jaws. It should partially cover the upper gums under the lips but not extend too much over the palate..

If you have to keep your jaw tense or your teeth clenched to keep your mouthguard in place, it doesn't fit properly and will expose your jaw to unnecessary strain and tension. If that mouthguard slips out of place on its own or with the slightest touch of your tongue, it's too loose.

Your Custom Night Guard Should Feel Snug.

When you first put it on, the night guard may feel tight, but it needs to fit securely to stay on your teeth without being held in place with assistance from your jaw. The snug fit will keep the custom night guard in place so that it does not fall out during the night.

Teeth shaving for braces

Orthodontics are designed to address issues like crowded or misaligned teeth. Braces and retainers can help move teeth into better positions that can alleviate crowding or misplacement. However, sometimes an orthodontist may need to shave a little bit off a tooth or two as part of the process.

Why do my teeth look bucked after braces?

Teeth flaring may occur after braces because the orthodontist has decided not to pull out teeth, a chronic jaw bite, bruxism, or a genetic disorder. Having flared teeth is typical after having braces removed.

At the end of the day, whether a power chain is used depends on your individual treatment needs. Your orthodontist can evaluate the alignment of your teeth and jaw to determine if you need braces, with or without power chains.

Read the instructions provided by the manufacture.

Every mouthguard manufacture has a different formula for their plastic polymer blend, so it is important to follow the boiling time. If you over boil it will ruin the mouthguard essentially making them unusable.

Do NOT soak your night guard in mouthwash, as that may cause damage. 3- If you have a plastic mouth guard, you can brush your guard using a soft bristle toothbrush and toothpaste. Gently brush your mouthguard and then rinse with cool water. 4- Store your night guard in a protective case.

If you use a mouthguard properly, then it should actually protect your gums, rather than damage them. If, however, you use a dirty, damaged or ill-fitting mouthguard then you could actually be damaging your gums.

Changes in your dental structure or alignment mean your old guard won't fit correctly. You will need to get a new mold made of your teeth and have a new guard created. Your nightguard should fit snug against your teeth without falling out or shifting.

Make a habit of deep cleaning your night guard as least once a month. This can be done several ways. The first is by using an over-the-counter nonabrasive denture cleaner. Simply place your night guard in a glass or bowl with water and allow the cleaner to dissolve completely into the water.

A night guard can shift your teeth, most especially if it was not custom-made to make a perfect fit in your mouth. If you use an over the counter night guard or ones that only cover the front teeth, more than likely, your back teeth will shift due to the pressure that your jaw exerts on them.

If the mouthguard isn't quite right, you can repeat the process of boiling and molding it to reshape your mouthguard again.

Heat water in a small bowl to approximately 170° F / 76° C (hot to the touch, but not boiling). 3. Place your SISU into the hot water and wait until it becomes soft and pliable (use a fork or other utensil to determine mouthguard softness).

Will baking soda clean a mouthguard?

Baking Soda

This natural ingredient removes debris and reduces bad odours from your mouthguard. In a clean bowl, combine equal parts baking soda and water to create a paste. Dip a toothbrush into this paste and gently brush your mouthguard. Rinse off and let your mouthguard air dry.

Do not bite down hard as you can actually bite through the plastic. Seal your lips and suck on the mouth guard hard for 45 seconds to one minute. During this time, press the guard against your teeth and gums with your tongue and lips while it cools. This will help form the device.

Night guards do not assist in placing the disc into the correct position. In addition, some night guards have uneven contacts from front to back teeth or side to side to side, causing uneven muscle activation which leads to more clenching and grinding, and TMJ pain.

If you do experience pain or your mouth is hurting after wearing a night guard, it is a sign that your night guard for teeth is not fitted properly in your mouth. The device may be too large or too small and is not providing the adequate protection that you desire and need.

The dental industry standard is that the mouthguard should cover up to and including the first premolar to ensure the highest level of protection from the guard for the wearer.

If your night guard regularly falls out or you cannot close your mouth with the night guard, it is a red flag that your night guard is not fitted correctly. If your night guard is ill-fitted, it won't properly protect your teeth and jaw from bruxism, TMJ, sleep apnea, or other sleep disorders.

However, experts caution guards can sometimes make the problem worse, particularly if they are poorly made. “Bruxism often comes down to a breathing or airway issue,” Dr. Chen said. “Night guards are a band aid, but if you want to stop grinding, you have to get to the root cause of the issue.”

Night guards must be hard. Hard night guards allow the lower teeth to slide around freely when the lower jaw is in motion. The problem with soft night guards, commonly found at local drug stores, is that they exacerbate bruxism because the jaws naturally want to chew soft things.

Are you stuck wearing a night guard for teeth forever? That depends. Wearing your night guard protects your oral health, so you should do so as long as you're bruxing. However, some people do stop bruxing.

Methods of Teeth Whitening

There are several methods to whiten your teeth after braces. The Orthodontists don't provide any teeth whitening services so we recommend seeing your dentist for a scale and clean, and to discuss risks and costs of your options before proceeding with any whitening treatments.

Does the dentist file your teeth after braces?

While your braces probably addressed any crooked or overlapping teeth, tooth reshaping can help fix those edges or surfaces that are misshapen, chipped, or extra-pointy. This technique removes small amounts of enamel to change the shape, length, or surface of one or more teeth.

Following the removal of your braces, your teeth will need a thorough cleaning. That's because braces tend to trap plaque and food in your teeth. Your orthodontist will also polish your teeth with a hard grinder, removing any residue of the adhesive used to fix your brackets to your teeth.

Plaque buildup is common behind the braces' wire and around the brackets, which adhere to the teeth. Eventually, this plaque may turn into thickened calculus, or tartar, which can have a brownish or yellowed color. Often, teeth affected by tartar or calculus can cause demineralization.

By correcting the imbalance between the upper and lower jaw and fixing the way the teeth and jaws meet, the lower half of your face will appear more harmonious. Your features will look a lot softer and more proportionate.

Many individuals have flared teeth after braces, which can lead to the question, is a flared set of teeth normal after braces? Although braces put some wear on the teeth to get them aligned properly, the teeth may move together and outward during the process and cause a flared appearance.

The third and final phase of orthodontic treatment is the retention phase. This phase occurs once the teeth have moved into the desired position and the use of the dental appliance ceases.

Orthodontists use power chain braces to close spaces between teeth during orthodontic treatment. They prefer to use them as a solution for moving teeth quickly, and for larger gaps where a tooth might be missing, perhaps due to extraction. Note that power chain braces are typically used toward the end of treatment.

The fact is that power chains do offer some advantages over individual elastic ligatures for braces. These include: Faster Tooth Movement when closing spaces – power chains are highly elastic, even more so than individual ligatures. Therefore, they can accelerate tooth movement.

Some dentists recommend keeping nightguards in a plastic container, because this way, the container will protect the guard from dust and bacteria. Other dentists recommend keeping nightguards in a glass of cold water.

Can You Drink Water With a Mouthguard? Yes, it is alright to drink water while wearing your mouthguard. Make sure to floss and brush your teeth before wearing them to ensure no food and bacteria will be stuck to risk tooth decay and Mouthguard stains.

How long should I soak my mouthguard in mouthwash?

Between both upper or lower night guards, the best results come from using a night guard for bottom teeth. People also find that these particular night guards are more comfortable and are a better fit. Night guards for bottom teeth are also less likely to trigger a gag reflex.

Let the mouth guard soak for at least a few minutes, then remove and rinse with water. Denture Cleaning Tablets, such as Polident or Efferdent, also work well at removing bacteria and give the mouth guard a clean, fresh taste.

If chemicals aren't your thing, you can clean your night guard naturally. Both white vinegar and apple-cider vinegar can act as a disinfectant. Fill up a glass with water halfway and then add in your vinegar of choice. Make sure to stir the mixture and then place your night guard into the solution.

Chronic teeth grinding: The constant pressure caused by bruxism, or chronic teeth grinding, slowly causes the gums to recede. Wearing a mouth guard at night can prevent this damage.

Can Night Guards Cause Swollen Gums? A custom fitted, well maintained dental night guard will not cause swollen gums. Rather, mouthguards protect the gums from bruxism-related gum disease. Swollen gums from mouth guards can appear if the mouth guard is not properly cleaned.

Carefully place mouth guard around all upper teeth. Bite down firmly into mouth guard while, suck in strongly and use fingers to press edges of mouth guard into teeth and gum line through the lips and cheeks (continue for 20 seconds). 5. Remove mouth guard and cool under tap water for 30 seconds.

Gently biting and pressing with your tongue and fingers to mold your mouthguard to your teeth. Suck excess water out mouthguard, while keeping it in your mouth. This helps suction and tighten your mouthguard to your teeth and mouth! Place in cold water for 20 seconds.

Cleaning Your Mouthguard Is Easy

Brushing, rinsing with soap and water, and soaking in mouthwash are all tried-and-true methods that dentists recommend. You can even explore hydrogen peroxide and dental sanitizing devices for an even deeper clean.

Can I soak my night guard in mouthwash?

2- Wash your night guard in mouthwash.

Submerging your night guard in mouthwash will help kill the germs left on your mouthguard. After you have submerged it in mouthwash rinse it with cool water.

empty text. For starters, we want to make it clear that you should never literally boil a mouthguard in hot water! That's because when water reaches the boiling point, 212 degrees Fahrenheit , it is hot enough to potentially deform the mouthguard permanently.

Ideally, your mouthguard should fit snug against your upper teeth without shifting and without the need to adjust or clench your jaws. It should partially cover the upper gums under the lips but not extend too much over the palate..

Mouth guards are used as protection over your row of teeth. It's the perfect way to keep your mouth safe while enjoying an activity. You only need a mouth guard for the top teeth. Unless you wear braces on your bottom or top teeth you only need to wear a mouth guard for the top row of your teeth.